Skil 3320-01 120-Volt Drill Press Review
DISCLAIMER: THERE ARE AFFILIATE LINKS IN THIS POST. THIS MEANS THAT AT NO COST TO YOU, WE WILL RECEIVE A SMALL COMMISSION IF YOU PURCHASE THROUGH OUR LINK. YOU MAY READ FULL DISCLOSURE POLICY FOR MORE INFORMATION.
If you are looking to drill accurately and make precise holes, then the Skil 3320 is one drill press that you should take a look at. This popular 10-inch press has been constructed with rugged components and is composed of detailed workmanship, making it perfect for light to moderate drill.
The Skil 3320 is equipped with the features that you have come to expect in a press, including adjustable depth control, adjustable speeds, laser sights, an adjustable work surface, and a large chuck that accommodates most drill bits.
Table of Contents
Skil 3320 Drill Press Features
So if you are tired of expensive drill presses that offer little value for money, then you should read on for an in-depth review.
The Skil 3320 is a drill press composed of a variable speed gearing system, with 5-speeds that accommodate different types of materials, bits, and bit sizes.
This system makes uses of a speed pulley system that is adjustable in nature, giving you the chance to realign the drive belts to take advantage of the multiple speeds (570, 900, 1390, 2050, and 3050 RPM). The manually operated belt is easy to understand and use.
The drill is also equipped with an impressive 3.2 amp motor, which powers the 120-volt drill press when you are drilling holes into different objects.
This motor is smooth to run and quiet to operate, and will accurately drill holes into materials of varying thickness as it is supported by a 2-inch speed travel and 5-speeds.
Laser Beam System
The Laser XR is a 2-beam laser that has been designed for accurate whole alignment on the 10-inch Skil 3320.
This laser beam system works to align drill bits by projecting 2 laser lines on your work piece, so that you can easily and accurately know where to align your bits. The process of aligning and adjusting these 2-beam lasers is extremely simple to do.
The Skil 3320 drill press has been constructed with study cast iron components, which gives you rigidity in all the vital parts of this machine. The worktable has been designed with a cast iron plate, which can be moved up and down using the fixed crank handle found on the support column of the press.
The slotted work surface can also be tilted 45 degrees left and right, so that you can drill angled holes with ease. Though partial assembly of the rugged unit is required, the process is easy and the end result is incredible.
Skil takes safety very seriously, and that is why the 3320 has been equipped with a bump-off switch for extra safety as you work.
This on/off switch which is located on the front of the drill press is very visible, and has an inbuilt safety key which allows you to disable the switch when it is not in use. This is particularly helpful for anyone living with children, as they are susceptible to accidents.
- Easy to assemble
- Quiet in operation
- Sturdy metal construction
- Can be shut down quickly
- Press is well balanced
- 2-sided motor adjustment
- Quill depth stop adjustment
- Laser light does not work well
- Changing speeds is a manual process
- The finishing of the table casting is not smooth
- No light built in
Skil 3320 Drill Press
Frequently Asked Questions (FAQ)
Q: What is the chuck size of the press?
A:The keyed chuck size is 1/2 inch.
Q: What is the maximum depth this press can drill through at one go?
A: The vertical stroke/plunge depth of the Skil is 2.5 inches, and if you want to drill through anything thicker you will need to work around the drill press.
Q: How do you adjust the speeds of the press?
A: Unfortunately, the Skil 3320 does not have automatic speed adjustments. Instead you will need to lift the top cover, loosen the hand-bolts found at the rear of the machine so as to release the tension, move the belt either up or down on the pulleys, and then put the hand-bolts back and tighten them. These speed settings are included in the instruction manual.
As you can see from the review above, heSkil 3320 is definitely a bench top drill press that will serve you well. This well-built press can compete with more expensive options, as it offers reliable features that will perform well on a consistent basis.
So if you have a limited budget and limited space but would like to have value for money, the Skil 3320 should definitely be on your shopping list.
You can also check some of our more drill press review below
- Craftsman 10 in Bench Drill Press Review
- Jet JDP-12 Drill Press Review
- Powermatic PM2800B 1792800B Drill Press Review
- Rockwell Rk7032 Shop Series Drill Press Review
- 10 Best Hammer Drills – Latest Drills Compared & Reviewed
- 5 Best Drill Press Under 200 Dollars – Top Budget Models