Wen 4210, 10 inch 5 speed drill press is a drilling machine that helps you to make holes accurately. The machine has enough power to drill through metals and other materials effectively. This drill press is constructed with a rigid frame that makes it durable and easy to make precise holes.
Accuracy is guaranteed when using the drill press because it has work light that illuminates your work and laser guide to achieve accurate drills. The machine fits perfectly in your workshop and it is easily movable from one point to the other.
Table of Contents
Wen 4210 Drill Press Features
Having this machine in your workshop assures you of high-quality drilling and you will always be proud of the performance of the drill press. Let me go through the feature details of this drill press on the detailed review below.
3.2 Amp Motor
The powerful motor also has ball bearings for more life. This enables you to have a smooth and a balanced performance at different levels of speed to get the best drilling experience.
The worktable is made from cast iron, which is a very strong and durable material. It bevels 45 degrees right and left giving you a good chance of making your drilling at different angles.
You can choose your desired angle and easily make the right adjustments when drilling holes.
Laser Guiding System
This is a technology that is built to enhance accurate drilling through the use of laser. The laser guiding system helps to make very accurate drills.
The machine also comes with a work light that increases visibility at your work area hence you cannot miss the desired point.
1/2 Inch Keyed Chuckand 2- 1/4 Inch Spindle Travel
The chuck gives you changeability with different bits which is important when drilling different sizes of holes.
The spindle can travel up to 2 inches deep on different materials. The Wen 4210 drill press is ideal for drilling holes in soft and hard materials to a depth of 2 inches.
5 Speed Setting
You can easily set the speed to your desired level. This drill machine has a 5 speed setting of 570, 900, 1390, 2050 and 3050 RPM.
When performing drilling on large and hard materials it is recommended to use a lower speed setting to get accurate and drills. If the material is softer, you can adjust to a high speed for quicker drilling.
- Smooth operation
- Does not have any wobble
- Has a strong motor
- Easy to use and adjust
- Comes with red safety glasses
- The table tilt requires you to make some bolts lose
- The end of the chuck key has a spring loaded pin which makes it hard to tighten the chuck
Wen 4210 Drill Press
Frequently Asked Questions (FAQ)
Q: What is the difference in size between the 8 inch and 10 inch chuck and column of the drill press?
A: The 8 inch drill press has 4 inches from support to the center of the chuck and the 10 inch is exactly 5 inches.
Q: How do I adjust the speed? Do I have to take off the belt and the cover?
A: Adjusting the speed is easier, and you have to take of the belt and the cover in order to adjust the speed to your required level.
Q: Is the drill press table removable?
A: Yes, the table is removable. You can simply assemble the machine without the table. The table can also be turned on to face different directions when it is not in the area of work.
I would highly recommend Wen 4210 drill press for larger industries and home based workshops because it does a great job that meets the needs of many users. This is a drill press that is very solid and built with quality materials making it very strong and durable.
You also enjoy drilling different materials with ease to get holes of different sizes. There are so many benefits that you will get from the wonderful features of the machine that makes drilling very effective and efficient.